Homeowners often ask how the paint actually goes on. On every exterior we paint, the answer is the same: one sprayed coat of Sherwin-Williams paint over a fully prepped surface. Here's what that means, why we do it, and what matters far more than the application method.
What Spraying Does Well
A professional paint sprayer applies an even, consistent layer of paint across large areas. On siding, fascia, soffits, trim, shutters, doors and garage doors, that means:
- An even finish with no brush strokes or roller texture
- Paint that reaches into siding laps, grooves and detailed trim profiles
- Faster application, which is a big reason most of our exteriors are finished in 1–3 days
Spraying Only Works on a Properly Prepped Surface
No application method can make paint stick to a dirty, peeling or rotted surface. That's why the prep comes first on every job:
- A full power wash
- Rotted wood replaced, never painted over
- SherMax sealant on joints and seams
- Primer at the groundline and roofline
Before any paint goes on, we walk the prep with you, and you approve it. Spraying also requires careful covering of windows, doors, fixtures and other surfaces that aren't being painted, which is part of the prep.
One Coat, the Right Paint
Our exterior standard is one sprayed coat on every surface in the scope, using your choice of three Sherwin-Williams paints:
- Economy — Latitude
- Standard — Duration
- Premium — Emerald Rain Refresh
You can compare them on our paint packages page.
What to Ask Any Painter About Application
Whoever paints your home, ask how the paint will be applied, how many coats are included, which product is being used by name, and what prep is in the written scope. Clear answers to those four questions tell you exactly what you're paying for.
